McDonnell Douglas DC-10/MD-10/MD-11
For the DC-10/MD-10 and MD-11 aircraft Talon Aerospace has developed the LED replacement package which allows the operator two different options.
Talon holds FAA STC approval for the LED Anti-Collision upper and lower Centerline Strobes. For this application Talon utilizes LED Centerline Strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-D0-U-001 and K328-D0-L-001 and K328-D0-A-001.
FAA STC held under ST03574AT.
Foreign approvals held: EASA/TC
Talon holds FAA STC approval for the LED Anti-Collision Forward and Aft Wing strobes. The LED Wing Tip Strobe system Talon Aerospace has developed is simplifying the existing system. The flasher control unit located in the lower avionics bay is replaced with a unit that has a mil-spec relay at its core, reducing expensive overhaul cost. The 2 wing control timing boxes located in each wing are replaced with bypass harnesses. The existing system has 6 wing tip strobes, 2 forward and 1 aft per wing. Talon offers a solution to replace the system with 6 replacement LED wing tip strobes but they also offer a solution whereby the system only has 4 replacement LED wing tip strobes. With the 6 strobe system the Talon Aerospace power supply is pin-programmed to delay the flash on the lower forward strobe by 200 mS, while for the 4 strobe system the lower strobe is removed and replaced with a blanking plate and pin-programming on the top strobe triggers a dual flash. The Talon Aerospace wing tip LED strobe unit are plug and play and use LED strobe assembly TAE1228-4A and power supply TAE1228-5 mounted in a rack that replaces the current incandescent unit.
Installation kit part numbers:
TAE1228-T2 - interface box lower avionics bay
6 strobe system
K228-D0-STR-001 - Wing Tip Strobe need 6 ea
K228-D0-WCB-001- Wing Control Bypass need 2 ea
4 strobe system
K228-D0-STR-002 - Wing Tip Strobe need 4 ea
K228-D0-WCB-002 - Wing Control Bypass need 2 ea
K228-D0-WBP-002 - Wing Blanking plate need 2 ea
FAA STC held under ST04002AT
Foreign approvals held: EASA
Talon holds FAA STC approval for the LED Sealed Beam replacement lamps for the Boeing DC-10/MD-10/MD-11 aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 46 LED taxi and logo light TAE0628-2 is used to replace OEM 4551 and Q4554 taxi/runway turn off and logo lights and PAR 36 LED engine-wing scan TAE0528-1 is used to replace OEM 4594 engine-wing scan lights.
This product is completely plug and play, there is no modification required to the airframe.
FAA STC held under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC, CAAC and TC
For the DC-10/MD-10 and MD-11 aircraft Talon Aerospace has developed the LED replacement package which allows the operator two different options.
Talon holds FAA STC approval for the LED Anti-Collision upper and lower Centerline Strobes. For this application Talon utilizes LED Centerline Strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-D0-U-001 and K328-D0-L-001 and K328-D0-A-001.
FAA STC held under ST03574AT.
Foreign approvals held: EASA/TC
Talon holds FAA STC approval for the LED Anti-Collision Forward and Aft Wing strobes. The LED Wing Tip Strobe system Talon Aerospace has developed is simplifying the existing system. The flasher control unit located in the lower avionics bay is replaced with a unit that has a mil-spec relay at its core, reducing expensive overhaul cost. The 2 wing control timing boxes located in each wing are replaced with bypass harnesses. The existing system has 6 wing tip strobes, 2 forward and 1 aft per wing. Talon offers a solution to replace the system with 6 replacement LED wing tip strobes but they also offer a solution whereby the system only has 4 replacement LED wing tip strobes. With the 6 strobe system the Talon Aerospace power supply is pin-programmed to delay the flash on the lower forward strobe by 200 mS, while for the 4 strobe system the lower strobe is removed and replaced with a blanking plate and pin-programming on the top strobe triggers a dual flash. The Talon Aerospace wing tip LED strobe unit are plug and play and use LED strobe assembly TAE1228-4A and power supply TAE1228-5 mounted in a rack that replaces the current incandescent unit.
Installation kit part numbers:
TAE1228-T2 - interface box lower avionics bay
6 strobe system
K228-D0-STR-001 - Wing Tip Strobe need 6 ea
K228-D0-WCB-001- Wing Control Bypass need 2 ea
4 strobe system
K228-D0-STR-002 - Wing Tip Strobe need 4 ea
K228-D0-WCB-002 - Wing Control Bypass need 2 ea
K228-D0-WBP-002 - Wing Blanking plate need 2 ea
FAA STC held under ST04002AT
Foreign approvals held: EASA
Talon holds FAA STC approval for the LED Sealed Beam replacement lamps for the Boeing DC-10/MD-10/MD-11 aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 46 LED taxi and logo light TAE0628-2 is used to replace OEM 4551 and Q4554 taxi/runway turn off and logo lights and PAR 36 LED engine-wing scan TAE0528-1 is used to replace OEM 4594 engine-wing scan lights.
This product is completely plug and play, there is no modification required to the airframe.
FAA STC held under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC, CAAC and TC