Airbus A320 Series
Talon holds FAA STC approval for the LED Anti-Collision upper and lower Centerline strobes. For this application Talon utilizes LED Centerline strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-A2-U-001 and K328-A2-L-001.
FAA STC held under ST03574AT.
Foreign approvals held: EASA/TC
Talon holds FAA STC approval for the LED Anti-Collision Wing Tip and Tail strobes. The LED Forward Wing Tip Strobe uses LED strobe assembly TAE1228-4A and LED power supply TAE1228-5. These units are retrofit using an installation kit. The installation kit includes required brackets, harnesses and mounting hardware to attach the LED strobes and LED power supplies to the airframe. Pin programming of the harnesses duplicates the dual flash common to OEM based forward wing tip strobe systems.
The LED Tail Strobe assembly also uses LED strobe assembly TAE1228-4A and power supply TAE1228-5. Talon has integrated the aft position lights into the strobe assembly, allowing for a reduction of total LRU count on the aircraft. The LED tail strobe installation kit includes mounting adapter, brackets, harnesses and mounting hardware. The kit also includes a lens assembly which is made from borosilicate glass.
Installation kit part numbers:
Wing tip Strobe need 2 ea
K228-A2-PWS-001 - forward wing tip strobe PWS kit, includes TAE1228-5
K228-A2-SFI-001 - forward wing tip strobe install kit
TAE1228-4A - LED wing/tail strobe
Tail Strobe need 1 ea
K228-A2-ASP-001 - tail strobe kit, includes TAE1228-4A
K228-A2-PST-001 - tail strobe PWS kit, includes TAE1228-5
K228-A2-TSI-001 - tail strobe install kit
FAA STC held under ST04002AT
Foreign approvals held: EASA
To replace the forward navigation lights Talon holds FAA STC approval on a plug and play LED Forward Navigation light replacement solution for straight wing aircraft. This unit will allow replacement of both current incandescent systems as well as LED based systems.
Part number TAE0028-2R (forward left) and TAE0028-2G (forward right).
FAA STC held under ST04352AT.
The LED aft position lights are integrated in the LED aft strobe head and are also hold FAA STC approval under ST04002AT. Talon is in development of a new LED solution that only replaces the aft position lights and still allows the OEM strobe to be used as an alternative option.
Talon holds FAA STC approval for the LED sealed beam replacement lamps for the Airbus A320 series aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 46 LED taxi light TAE0628-2 is used to replace the OEM Q4554 taxi light, PAR 36 LED engine-wing scan light TAE0528-1 is used to replace OEM 4594 engine-wing scan and PAR 36 LED runway turn off light and logo light TAE0528-2 is used to replace OEM 4626 runway turn off and logo lights. As an alternative TAE0528-2W, a PAR 36 warm white LED bulb can be used for the logo.
This product is completely plug and play, there is no modification required to the airframe.
FAA STC held on LED sealed beam and LED logo under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC and TC
As an alternative to the LED sealed beam logo light solution Talon also holds approval on a new full LED Logo light assembly. This new LED assembly consists of a rack which mounts an LED module, available in cool white and warm white and a transformer assembly that connects to aircraft power. A new lens completes the assembly. This unit improves the overall light coverage on the tail surface compared to the sealed beam solution and reduces weight slightly.
Install kit part number K428-A2-LGL-001 and LED module part numbers TAE0428-1 (cool white) and TAE0428-1W (warm white).
FAA STC held on LED sealed beam and LED logo under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC and TC
Talon holds FAA STC approval for the LED Anti-Collision upper and lower Centerline strobes. For this application Talon utilizes LED Centerline strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-A2-U-001 and K328-A2-L-001.
FAA STC held under ST03574AT.
Foreign approvals held: EASA/TC
Talon holds FAA STC approval for the LED Anti-Collision Wing Tip and Tail strobes. The LED Forward Wing Tip Strobe uses LED strobe assembly TAE1228-4A and LED power supply TAE1228-5. These units are retrofit using an installation kit. The installation kit includes required brackets, harnesses and mounting hardware to attach the LED strobes and LED power supplies to the airframe. Pin programming of the harnesses duplicates the dual flash common to OEM based forward wing tip strobe systems.
The LED Tail Strobe assembly also uses LED strobe assembly TAE1228-4A and power supply TAE1228-5. Talon has integrated the aft position lights into the strobe assembly, allowing for a reduction of total LRU count on the aircraft. The LED tail strobe installation kit includes mounting adapter, brackets, harnesses and mounting hardware. The kit also includes a lens assembly which is made from borosilicate glass.
Installation kit part numbers:
Wing tip Strobe need 2 ea
K228-A2-PWS-001 - forward wing tip strobe PWS kit, includes TAE1228-5
K228-A2-SFI-001 - forward wing tip strobe install kit
TAE1228-4A - LED wing/tail strobe
Tail Strobe need 1 ea
K228-A2-ASP-001 - tail strobe kit, includes TAE1228-4A
K228-A2-PST-001 - tail strobe PWS kit, includes TAE1228-5
K228-A2-TSI-001 - tail strobe install kit
FAA STC held under ST04002AT
Foreign approvals held: EASA
To replace the forward navigation lights Talon holds FAA STC approval on a plug and play LED Forward Navigation light replacement solution for straight wing aircraft. This unit will allow replacement of both current incandescent systems as well as LED based systems.
Part number TAE0028-2R (forward left) and TAE0028-2G (forward right).
FAA STC held under ST04352AT.
The LED aft position lights are integrated in the LED aft strobe head and are also hold FAA STC approval under ST04002AT. Talon is in development of a new LED solution that only replaces the aft position lights and still allows the OEM strobe to be used as an alternative option.
Talon holds FAA STC approval for the LED sealed beam replacement lamps for the Airbus A320 series aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 46 LED taxi light TAE0628-2 is used to replace the OEM Q4554 taxi light, PAR 36 LED engine-wing scan light TAE0528-1 is used to replace OEM 4594 engine-wing scan and PAR 36 LED runway turn off light and logo light TAE0528-2 is used to replace OEM 4626 runway turn off and logo lights. As an alternative TAE0528-2W, a PAR 36 warm white LED bulb can be used for the logo.
This product is completely plug and play, there is no modification required to the airframe.
FAA STC held on LED sealed beam and LED logo under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC and TC
As an alternative to the LED sealed beam logo light solution Talon also holds approval on a new full LED Logo light assembly. This new LED assembly consists of a rack which mounts an LED module, available in cool white and warm white and a transformer assembly that connects to aircraft power. A new lens completes the assembly. This unit improves the overall light coverage on the tail surface compared to the sealed beam solution and reduces weight slightly.
Install kit part number K428-A2-LGL-001 and LED module part numbers TAE0428-1 (cool white) and TAE0428-1W (warm white).
FAA STC held on LED sealed beam and LED logo under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC and TC