Boeing B757
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision upper and lower Centerline strobes. This application utilizes Talon LED Centerline strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-B5-U-001 and K328-B5-L-001.
FAA STC held under ST03574AT
Foreign approvals held: EASA/TC
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision Wing Tip Strobes.
The LED Wing Tip Strobe uses LED strobe assembly K228-B5-STR-001 (includes TAE1228-1D) and LED power supply K228-B5-PWS-001 (includes TAE1228-5) for the straight wing aircraft. These units are retrofit using installation kit K228-B5-SFI-001. The installation kit includes required brackets, harnesses and mounting hardware to attach the LED strobes and LED power supplies to the airframe.
For aircraft equipped with APB winglets LED Wing Tip Strobe TAE1228-2C is in development. This strobe will be used in combination with LED power supply assembly K228-B3-PSW-001 and installation kit K228-B5-SFI-002.
FAA STC held under ST04002AT
Foreign approvals held: EASA
Proponent Technical Services holds an FAA STC approval for the Talon LED Sealed Beam replacement lamps for Boeing B757 aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 46 LED taxi light TAE0628-2 is used to replace the OEM Q4554 and 4551 taxi/runway turn off lights and PAR 36 LED engine-wing scan and logo light TAE0528-1 is used to replace the OEM 4594/Q4631/Q4632 bulbs. As an alternative LED bulb TAE0528-1W can be used as a warm white logo light.
This product is completely plug and play, there is no modification required to the airframe.
For the B757 aircraft Talon holds FAA STC approval for a new LED Logo Light solution. This B757 LED Logo Light Assembly can replace both the old sealed beam based as well as the halogen based OEM logo lights. The original Par 36 logo lights can be replaced by the Talon LED sealed beam replacement lamp TAE0528-1 or TAE0528-1W, Proponent Technical Services can also offer the Talon solution for the post-service bulletin halogen based logo lights, which can be replaced with the TAE0428-1 or TAE0428-1W and the B757 logo light installation kits. This new LED logo can also be used to replace the sealed beam assemblies. For the halogen based logo lights the lens is retained from the OEM unit. Proponent Technical Services does offer the new Talon lens available to use with the new LED assembly.
FAA STC held for LED sealed beam and LED logo under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC, CAAC and TC
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision upper and lower Centerline strobes. This application utilizes Talon LED Centerline strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-B5-U-001 and K328-B5-L-001.
FAA STC held under ST03574AT
Foreign approvals held: EASA/TC
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision Wing Tip Strobes.
The LED Wing Tip Strobe uses LED strobe assembly K228-B5-STR-001 (includes TAE1228-1D) and LED power supply K228-B5-PWS-001 (includes TAE1228-5) for the straight wing aircraft. These units are retrofit using installation kit K228-B5-SFI-001. The installation kit includes required brackets, harnesses and mounting hardware to attach the LED strobes and LED power supplies to the airframe.
For aircraft equipped with APB winglets LED Wing Tip Strobe TAE1228-2C is in development. This strobe will be used in combination with LED power supply assembly K228-B3-PSW-001 and installation kit K228-B5-SFI-002.
FAA STC held under ST04002AT
Foreign approvals held: EASA
Proponent Technical Services holds an FAA STC approval for the Talon LED Sealed Beam replacement lamps for Boeing B757 aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 46 LED taxi light TAE0628-2 is used to replace the OEM Q4554 and 4551 taxi/runway turn off lights and PAR 36 LED engine-wing scan and logo light TAE0528-1 is used to replace the OEM 4594/Q4631/Q4632 bulbs. As an alternative LED bulb TAE0528-1W can be used as a warm white logo light.
This product is completely plug and play, there is no modification required to the airframe.
For the B757 aircraft Talon holds FAA STC approval for a new LED Logo Light solution. This B757 LED Logo Light Assembly can replace both the old sealed beam based as well as the halogen based OEM logo lights. The original Par 36 logo lights can be replaced by the Talon LED sealed beam replacement lamp TAE0528-1 or TAE0528-1W, Proponent Technical Services can also offer the Talon solution for the post-service bulletin halogen based logo lights, which can be replaced with the TAE0428-1 or TAE0428-1W and the B757 logo light installation kits. This new LED logo can also be used to replace the sealed beam assemblies. For the halogen based logo lights the lens is retained from the OEM unit. Proponent Technical Services does offer the new Talon lens available to use with the new LED assembly.
FAA STC held for LED sealed beam and LED logo under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC, CAAC and TC