Airbus A330/A340
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision upper and lower Centerline strobes. This application utilizes Talon LED Centerline strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-A3-U-001 and K328-A3-L-001 and K328-A3-3-001.
FAA STC held under ST03574AT
Foreign approvals held: EASA/TC
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision Wing Tip and Tail strobes.
LED Wing Tip Strobe for straight wing tip uses TAE1228-4A LED strobe assembly to replace the OEM strobe assembly and K228-A2-PSW-001 kit (includes TAE1228-5) to replace the OEM power supply assembly. Installation kit K228-A2-SFI-001 completes the assembly.
Pin programming of the harnesses duplicates the dual flash common to OEM based forward wing tip strobe systems.
The LED Tail Strobe uses K228-A2-ASP-001 kit (includes TAE1228-4A) to replace the OEM strobe assembly and K228-A2-PST-001 kit (includes TAE1228-5) to replace the OEM power supply assembly. Installation kit K228-A2-STI-001 completes the assembly. The Talon solution has integrated the aft position lights into the strobe assembly, allowing for a reduction of total LRU count on the aircraft.
The installation kits include all required brackets, harnesses and mounting hardware to attach the LED wing tip and tail strobes and LED power supply to the airframe.
FAA STC held under ST04002AT
Foreign approvals held: EASA
Proponent Technical Services holds an FAA STC approval on a plug and play Talon LED Forward Navigation light replacement solution for the A330/A340 aircraft. This unit will allow replacement of both current incandescent systems as well as LED based systems.
Part number TAE0028-1R (forward left Red) and TAE0028-1G (forward right Green).
FAA STC held under ST04352AT
The LED aft position lights are integrated in the LED Tail Strobe Solution and hold FAA STC approval under ST04002AT. Proponent Technical Services is in development of an alternative LED solution that only replaces the aft position lights and still allows the OEM strobe to be used.
Proponent Technical Services holds an FAA STC approval for the Talon LED sealed beam replacement lamps for Airbus A330/A340 aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 64 LED taxi/take-off light TAE0728-1D is used to replace the OEM 4557 taxi/take-off light and PAR 36 LED engine-wing scan and logo light TAE0528-1 is used to replace OEM 4594/Q4631/Q4632 engine-wing scan and logo lights.
As an alternative TAE0528-1W, a warm white PAR 36 LED bulb can be used for the logo. TAE0528-2, a PAR 36 runway turn off light is used to replace OEM bulbs 4626.
This product is completely plug and play, there is no modification required to the airframe.
The Talon LED bulbs will work with most pulse lite systems.
For both the halogen based and sealed beam based logo lights Proponent Technical Services also offers the completely plug and play Talon LED logo light assembly K428-A3-LGL-001 which replaces the complete OEM assembly with a new LED based assembly. This lens is retained from the OEM unit or Talon can deliver new lenses to complete the installation of this unit under part number 428-050-1. Proponent Technical Services also has a warm white LED logo light assembly available under part number K428-A3-LGL-001W.
FAA STC held on LED sealed beam and LED logo assembly under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC, CAAC, FATA and TC
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision upper and lower Centerline strobes. This application utilizes Talon LED Centerline strobe TAE0328-2 with installation kits, which include an installation adapter, harness and hardware required to mount these to the aircraft.
Installation kit part numbers K328-A3-U-001 and K328-A3-L-001 and K328-A3-3-001.
FAA STC held under ST03574AT
Foreign approvals held: EASA/TC
Proponent Technical Services holds an FAA STC approval for the Talon LED Anti-Collision Wing Tip and Tail strobes.
LED Wing Tip Strobe for straight wing tip uses TAE1228-4A LED strobe assembly to replace the OEM strobe assembly and K228-A2-PSW-001 kit (includes TAE1228-5) to replace the OEM power supply assembly. Installation kit K228-A2-SFI-001 completes the assembly.
Pin programming of the harnesses duplicates the dual flash common to OEM based forward wing tip strobe systems.
The LED Tail Strobe uses K228-A2-ASP-001 kit (includes TAE1228-4A) to replace the OEM strobe assembly and K228-A2-PST-001 kit (includes TAE1228-5) to replace the OEM power supply assembly. Installation kit K228-A2-STI-001 completes the assembly. The Talon solution has integrated the aft position lights into the strobe assembly, allowing for a reduction of total LRU count on the aircraft.
The installation kits include all required brackets, harnesses and mounting hardware to attach the LED wing tip and tail strobes and LED power supply to the airframe.
FAA STC held under ST04002AT
Foreign approvals held: EASA
Proponent Technical Services holds an FAA STC approval on a plug and play Talon LED Forward Navigation light replacement solution for the A330/A340 aircraft. This unit will allow replacement of both current incandescent systems as well as LED based systems.
Part number TAE0028-1R (forward left Red) and TAE0028-1G (forward right Green).
FAA STC held under ST04352AT
The LED aft position lights are integrated in the LED Tail Strobe Solution and hold FAA STC approval under ST04002AT. Proponent Technical Services is in development of an alternative LED solution that only replaces the aft position lights and still allows the OEM strobe to be used.
Proponent Technical Services holds an FAA STC approval for the Talon LED sealed beam replacement lamps for Airbus A330/A340 aircraft.
PAR 64 LED landing light TAE0728-1 is used to replace OEM Q4559X landing light, PAR 64 LED taxi/take-off light TAE0728-1D is used to replace the OEM 4557 taxi/take-off light and PAR 36 LED engine-wing scan and logo light TAE0528-1 is used to replace OEM 4594/Q4631/Q4632 engine-wing scan and logo lights.
As an alternative TAE0528-1W, a warm white PAR 36 LED bulb can be used for the logo. TAE0528-2, a PAR 36 runway turn off light is used to replace OEM bulbs 4626.
This product is completely plug and play, there is no modification required to the airframe.
The Talon LED bulbs will work with most pulse lite systems.
For both the halogen based and sealed beam based logo lights Proponent Technical Services also offers the completely plug and play Talon LED logo light assembly K428-A3-LGL-001 which replaces the complete OEM assembly with a new LED based assembly. This lens is retained from the OEM unit or Talon can deliver new lenses to complete the installation of this unit under part number 428-050-1. Proponent Technical Services also has a warm white LED logo light assembly available under part number K428-A3-LGL-001W.
FAA STC held on LED sealed beam and LED logo assembly under ST04177AT
Foreign approvals held for: EASA, ANAC, DGAC, CAAC, FATA and TC